Maintenance of the chain on the hottest printing m

2022-07-25
  • Detail

Maintenance and repair of the chain on the printing press

the chain is an important link to ensure that the paper teeth can be unpacked and the spray paint of the universal experimental machine can accurately take paper from the embossing cylinder. The requirements for its accuracy are quite strict From the perspective of stable operation, the chain row must be able to be firmly pressed against the sprockets on both sides of the paper receiving drum to prevent its jumping from causing unstable handover and noise The paper receiving chain takes paper from the last imprint cylinder, and the requirements for paper transfer between other cylinders are the same

1. The speed of the receiving chain row tooth pad is equal to that of the impression cylinder tooth pad That is, the handover is carried out in a relatively static state

2. The position of the paper receiving tooth row tooth pad and the position of the impression cylinder tooth pad correspond to each other Do not lead or lag, resulting in unstable handover

3. The tooth pad of the paper receiving chain row should be on a plane That is to say, the precondition of paper positioning state shall be ensured during handover, and the surface shall have a large friction coefficient

4. The opening and closing of the teeth of the paper receiving chain row should be consistent That is to prevent local friction transmission from being damaged, causing imprint sliding or tearing

5. The biting force of the paper receiving tooth row shall meet the printing requirements Since the paper receiving chain is directly involved in the printing process, its bite force must be large enough to remove the paper from the rubber drum, otherwise it will stick to the surface of the blanket However, if the bite force of the dental pad is too large, the long-term impact will cause the change of the position of the dental pad, which will affect the stability of the handover

the best way to solve this problem is to make the paper completely leave the rubber roller. Only after the sensor cylinder is replaced, it is transferred from the imprint cylinder to the paper receiving cylinder, so that the paper receiving chain has a small bite force At present, some equipment change the impression cylinder to double diameter cylinder, and some equipment add two paper transfer cylinders after the last group of impression cylinders

from the point of view of printing process, the printing pressure of the last group is still appropriately reduced, and the viscosity of the ink is also appropriately reduced, thus reducing the transmission force required for the separation of printing sheets and improving the working environment of the paper receiving chain

6. The number of chain links of the paper receiving tooth row is a prime number. The equipment idle cycle exceeds 1 week (that is, it can only be divided by 1 or itself) This ensures that all links of the paper receiving chain row are evenly worn, which can improve the overall service life of the chain

7. Operation stability of the paper receiving chain In addition to the processing and installation guarantee, the stable operation of the paper receiving chain must also be ensured from the design Between the two chain rows, one is the active chain row, and the other is in the auxiliary position The positions of both ends of the active chain row must be absolutely accurate, while the positions of the auxiliary chain row must be absolutely accurate at the paper taking place, and the other end can be in the automatic adjustment state, so as to prevent the existence of internal force between the two chain rows The die opening plate shall be installed on one side of the auxiliary chain row, which can play a buffer role to a certain extent

Copyright © 2011 JIN SHI